AnCon Trading I/S

Ceramic materials

 

Al2O3

Alumina 99,7% is a ceramic material on the basis of highly pure alumina with small additives of magnesium oxide.
 
Characteristics: Density: 3,9 g/cm³
Hardness: 400 HV
Pressure strength: 2800 N/mm²
Bending strength (blank): 340 MPa
Modulus of elasticity: 380 GPa
 
.....................................................................................................
 
 

ZrO2-3Y

Zircon oxide ceramics is a ceramic material on the basis ZrO2 zircon oxide part-stabilized by highly pure with MolY2O
 
Characteristics: Density: 6,05 g/cm³
Hardness: 1300 HV
Pressure strength: 4000 N/mm²
Bending strength (blank): 1200 MPa
 
 
.....................................................................................................
 
 
 
 

ZrO2-3Y2OA

Zircon oxide ceramics is a dispersion ceramic(s) on the basis of part-stabilized zircon oxide and alumina, which leads to an increase of the firmness and/or facture toughness opposite pure ZrO2.
 
Characteristics: Density: 5,5 g/cm³
Hardness: 1300 HV
Bending strength (blank): 2400 MPa
 
.....................................................................................................
 
 

LPS-SiC

LPS SiC possesses a higher facture toughness by its special structure construction in relation to other ceramic(s), in particular the past SiC materials.
 
Characteristics: Density: 3,18 g/cm³
Bending strength (blank): 590 MPa
Facture toughness KIC: 6,9 MPa/m²
Spec electric resistance: 0,2 - 0,5 Ù/cm
.....................................................................................................
 
 
 
 

AlN

Aluminium nitride is a ceramic material, the one very high heat conductivity with at the same time good electrical isolation characteristics as well as outstanding corrosion characteristics possesses.
 
Characteristics: Density: 3,2 g/cm³
Bending strength: >250 MPa
Spec heat conductivity:120-140 W/mK
Middle longitudinal strain (20 -1000°C)
Resistance: 450 K
.....................................................................................................